Bykski GPU Water Block For MSI RTX 4060 Ventus 2X / Gaming X / MLG, Full Cover With Backplate PC Water Cooling Cooler, N-MS4060VES-X
Bykski GPU Water Block For MSI RTX 4060 Ventus 2X / Gaming X / MLG, Full Cover With Backplate PC Water Cooling Cooler, N-MS4060VES-X
Regular price
$157.01 USD
Regular price
Sale price
$157.01 USD
Unit price
per
Tax included.
Shipping calculated at checkout.
SKU:N-MS4060VES-X_RBW
Couldn't load pickup availability
🇩🇪 Versand nach Deutschland — 7–14 Werktage · Sendungsverfolgung inklusive
FAQ
How do I check GPU compatibility?
Check the "Compatible With" section on this page. Each block is designed for specific PCB layouts. If your card model is listed, it will fit. Contact us with your exact GPU model for confirmation.
Does it include thermal pads and backplate?
Yes. Package includes pre-cut thermal pads for VRAM/VRM, thermal paste for GPU die, backplate (where indicated), mounting screws, and plug fittings.
What fittings do I need?
Standard G1/4" compression fittings. Compatible with 10/13mm soft tube or 12/14/16mm hard tube (OD) depending on your loop setup.
What is the shipping time?
Versand nach Deutschland: ca. 7–14 Werktage mit Sendungsverfolgung.
GPU Wasserkühlung. FormulaMod liefert Bykski und Barrow GPU Wasserblöcke nach Deutschland. G1/4-Gewinde.
Product description:
This full coverage block directly cools the graphics cards core (GPU), graphics memory (RAM), and voltage regulator modules (VRM). By directly cooling these components, you can achieve great temperatures and reach higher overclocks or extend the overall lifespan of your card by running at below-factory temperatures.
The block is constructed of high-purity copper that is nickel electroplated to prevent oxidation. A high-flow design is used to allow multiple blocks to run in series. Top and bottom ports can be used to configure parallel or serial designs in multi-block setups.
Specifications:
Block material: nickel electroplated high purity copper + high quality acrylic
Backplate material: black anodized aluminum (not in contact with coolant)
Backplate material: black anodized aluminum (not in contact with coolant)
Compatibility:
(Including but not limited to the following models)
MSI RTX 4060 Ventus 2X Black 8G OC
MSI RTX 4060 Gaming X 8G
MSI RTX 4060 Gaming X 8G
MSI RTX 4060 Gaming MLG
After narrowing your selection, please check the entire PCB picture to ensure compatibility. If you have any questions, don't hesitate to contact support for confirmation.
Compatibility based on this(these) PCB designs only.
Inlet/outlet port size: G1/4" thread
Inlet/outlet port size: G1/4" thread
Parts Included:
1x Full coverage GPU water block
1x Backplate
2x Plug fitting
1x Installation screwdriver
1x Lighting sync cable
1x Bykski thermal pads (set)
1x Backplate
2x Plug fitting
1x Installation screwdriver
1x Lighting sync cable
1x Bykski thermal pads (set)
Warnings:
1. Addressable RGB/A-RGB/RBW is 5V 3pin lighting system, and is ONLY compatible with 5V components.
RGB is 12V 4pin lighting system, and is ONLY compatible with 12V components.
Mix and match will NOT work and will cause damage.
2. This is a repair or replacement-only item. Returns are not accepted in principle on compatibility issues or if the block has had water/fluid run through it.
3. The manufacturer reserves the right to alter the block design to expand compatibility or upgrade/modify the product. The delivered item may not 100% match the pictured item.
The product does NOT come with English instructions. Please see the product gallery images for the install guide if available. Generally, thermal pads should be installed on the card where the block has corresponding raised contact points, except the GPU core, which uses thermal pad. In the middle part of product gallery images, there will be a picture description/display where the thermal pad should be placed. Installing pads on other components can lead to improper contact and poor performance.
4. Not responsible for any damage caused by or when using this product. Please use it at your own risk.
RGB is 12V 4pin lighting system, and is ONLY compatible with 12V components.
Mix and match will NOT work and will cause damage.
2. This is a repair or replacement-only item. Returns are not accepted in principle on compatibility issues or if the block has had water/fluid run through it.
3. The manufacturer reserves the right to alter the block design to expand compatibility or upgrade/modify the product. The delivered item may not 100% match the pictured item.
The product does NOT come with English instructions. Please see the product gallery images for the install guide if available. Generally, thermal pads should be installed on the card where the block has corresponding raised contact points, except the GPU core, which uses thermal pad. In the middle part of product gallery images, there will be a picture description/display where the thermal pad should be placed. Installing pads on other components can lead to improper contact and poor performance.
4. Not responsible for any damage caused by or when using this product. Please use it at your own risk.
5. About [Extra option] - "Additional light controller"
If you do not intend/unavailable to sync lighting to the motherboard, you can choose this option to make lighting work normally.
*This controller can also be used as a hub (up to 4) at the same time for Bykski's same lighting system.
The copper plate of the block is processed by CNC machines. The machining marks and slightly uneven on the copper plate are normal and do not affect the use of the block. Please pay attention to this.
