Barrow GPU Water Block Cooling Backplane For GIGABYTE 3090 3080Ti 3080 GAMING EAGLE VISION, Waterway Backplate BS-GIG3090-PA2 B
Barrow GPU Water Block Cooling Backplane For GIGABYTE 3090 3080Ti 3080 GAMING EAGLE VISION, Waterway Backplate BS-GIG3090-PA2 B
SKU:BS-GIG3090-PA2*1+ARSKZQ*1
15 auf Lager
Verfügbarkeit für Abholungen konnte nicht geladen werden
Compatibility:
(Including but not limited to the following models)
Gigabyte RTX 3090 GAMING OC 24G
Gigabyte RTX 3090 EAGLE OC 24G
Gigabyte RTX 3090 EAGLE 24G
Gigabyte RTX 3090 VISION OC 24G
Gigabyte RTX 3080 Ti VISION OC 12G
Gigabyte RTX 3080 Ti GAMING OC 12G
Gigabyte RTX 3080 GAMING OC 10G (rev1.0)
Gigabyte RTX 3080 GAMING OC 10G (rev2.0)
Gigabyte RTX 3080 EAGLE OC 10G (rev. 1.0)
Gigabyte RTX 3080 EAGLE OC 10G (rev. 2.0)
Gigabyte RTX 3080 EAGLE 10G (rev. 1.0)
Gigabyte RTX 3080 EAGLE 10G(rev. 2.0)
Gigabyte RTX 3080 VISION 0C 10G (rev. 1.0)
Gigabyte RTX 3080 VISION 0C 10G (rev. 2.0)
After narrowing your selection, please check the entire PCB picture to ensure compatibility. If you have any questions, don't hesitate to contact support for confirmation.
Compatibility based on this(these) PCB designs only.
Inlet/outlet port size: G1/4" thread
Parts Included:
1x Full coverage GPU water block (according to the options of the selection)
1x Backplane (according to the options of the selection)
2x Plug fitting
1x Screw set
1x Barrow thermal pads (set)
Warnings:
1. Addressable RGB/A-RGB is 5V 3pin lighting system, and is ONLY compatible with 5V components.
RGB is 12V 4pin lighting system, and is ONLY compatible with 12V components.
Mix and match will NOT work and will cause damage.
2. This is a repair or replacement-only item. Returns are not accepted in principle on compatibility issues or if the block has had water/fluid run through it.
3. The manufacturer reserves the right to alter the block design to expand compatibility or upgrade/modify the product. The delivered item may not 100% match the pictured item.
The product does NOT come with English instructions. Please see the product gallery images for the install guide if available. Generally, thermal pads should be installed on the card where the block has corresponding raised contact points, except the GPU core, which uses thermal pad. In the middle part of product gallery images, there will be a picture description/display where the thermal pad should be placed. Installing pads on other components can lead to improper contact and poor performance.
4. Not responsible for any damage caused by or when using this product. Please use it at your own risk.
Frequently Asked Questions
Is this waterblock compatible with my RTX 3090?
This Barrow waterblock is designed for the RTX 3090. Check the product title for specific card brand compatibility — non-reference PCB designs (ASUS Strix, MSI Suprim, etc.) require model-specific blocks. Reference/Founders Edition cards use a different block.
How much quieter will my RTX 3090 be with water cooling?
Stock RTX 3090 coolers run at 45-65 dBA under sustained AI workloads like Ollama or Stable Diffusion. A full-cover waterblock reduces noise to under 30 dBA — quieter than a refrigerator. VRAM temperatures also drop from 90°C+ to 60-70°C, preventing thermal throttling during long inference sessions.
What else do I need for a complete loop?
Besides this waterblock, a complete custom loop needs: a radiator (360mm minimum for 350W TDP), a D5 or DDC pump with reservoir, G1/4 fittings (8-12 pieces), tubing (soft or hard), and coolant. FormulaMod carries all components — browse our AI Workstation Cooling collection for complete setups.
Can I run this 24/7 for AI inference?
Yes. Water cooling is designed for sustained loads, unlike air coolers which rely on fan speeds that create noise. A properly maintained loop can run 24/7 indefinitely with coolant changes every 12-18 months.
Does FormulaMod ship to the USA and Europe?
Yes. We ship worldwide from our Shenzhen warehouse. USA and EU orders typically arrive within 7 days. All products are covered by our return policy.
Why Water Cool the RTX 3090?
- Thermal pads on 2-4 year old used 3090s are degraded; installing a waterblock = complete thermal reset, revives ex-mining/ex-gaming cards for AI duty
- 350W sustained for 24/7 Ollama inference = 55 dBA fan noise from the triple-fan FE cooler — unacceptable for home office/bedroom
- Dual-3090 builds (700W total GPU) are the cheapest path to 48GB VRAM for 70B LLMs — water cooling is the only way to fit both in a normal case
- #1 target for FormulaMod — the largest used-GPU waterblock upgrade market in existence
Full-cover water blocks cool GPU die + VRAM + VRM simultaneously — unlike air coolers that only target the GPU die.
