Skip to product information
1 of 18

FormulaMod Graphics Card Vertical Holder With PCI Express Extension Cable , Fixed GPU PCI-E Built-in Vertical Bracket

FormulaMod Graphics Card Vertical Holder With PCI Express Extension Cable , Fixed GPU PCI-E Built-in Vertical Bracket

Regular price $18.30 USD
Regular price Sale price $18.30 USD
Sale Sold out
Shipping calculated at checkout.

Product Advantages:

Wire advantage, use anti-interference low-resistance thin soft custom wire, high frequency support PCIe 3.0 X 16 128G/bps stable transmission. Design advantages, the differential signal has no via design, there is no signal attenuation interference of parasitic capacitance and parasitic inductance, and there will be no CAF micro short circuit phenomenon, and the product is durable. The short clip design of the connector will not block the graphics card, and the graphics card installation is more stable. Material advantage, the product uses high-quality materials, PCB workmanship is precise, PCB uses high TG plate, copper thickness is thickened to 1oz, the interface gold plating content is sufficient, the gold plating foot has good conductivity, can reduce the rust caused by increased oxidation resistance Blue screen problem. The wire material selected by the product itself is very durable. It is protected by a PCB gasket with a thickness of 3mm at the metal welding point, and locked with screws and hexagonal nuts to tighten. Drop nail problem. The wire can be bent or folded without affecting the use. PCB dwarf and fat design, the dwarf will not get stuck to the graphics card, and the fat and lengthened design makes the graphics card easier to install.

Purchase Note:

1. This product only contains the products in the list. Other products such as GPU, case, motherboard, etc. are only for reference display.

2. Before buying, please pay attention to the cable length description, so as to avoid choosing the wrong length and making it unusable

3. In case of upgrading to the appearance and structure, no further notice, the real object shall prevail

Product Specifications

Product name: Graphics Card Vertical Holder With Extension Cable

Product model: Fm-ZJYCX

Cable length: 15/20/25/30/40/50 cm

Adapted graphics: RTX2080ti, GTX1080ti, Titan XP, radeon580, VEGA64, etc.,

Support the PCIe new graphics card launched in the last three years.

Bandwidth speed: PCIe 3.0 x16 (gen3, 128G.s) stable full speed

Installation Restrictions:

1. Case must have more than 6 pci slots,

2. The case reserved space length must exceed the length of the graphics card plus 4.5cm to be installed

Example: Reserved space 40cm Graphics card 29cm 40 cm > 29 cm + 4.5 cm , holder available

View full details